Immediate versus water-storage performance of Class V flowable composite restoratives

Objectives The aims of this investigation were to clarify the effects of 24 h water-storage and finishing time on mechanical properties and marginal adaptation to a Class V cavity of eight modern flowable resin-composites. Methods Eight flowable composites, plus two controls (one microfilled and one hybrid composite), were investigated with specimen sub-groups (n = 10) for each property measured. The principal series of experiments was conducted in model Class V cavities with interfacial polishing either immediately (3 min) after setting or after 24 h water-storage. After the finishing procedure, each tooth was sectioned in a buccolingual direction through the center of the restoration, and the presence or absence of marginal-gaps was measured (and then summed for each cavity) at 14 points (each 0.5 mm apart) along the cavity restoration interface (n = 10 per group; total points measured = 140). The shear bond-strengths to enamel and to dentin, and flexural strengths and moduli data were also measured at 3 min and after 24 h water-storage. Results For all flowable composites, polished immediately after setting, 14–30 summed gaps were observed (controls: 64 and 42). For specimens polished after 24 h, a significantly (p &#60; 0.05) reduced number of 8–17 summed gaps occurred for only 3 flowable composites; whereas for 5 flowable composites there were non-significantly-different (p &#62; 0.05) numbers (11–17) of summed gaps (controls: 28 and 22). After 24 h storage, shear bond-strengths to enamel and to dentin, flexural strengths and moduli increased highly significantly (p &#60; 0.001) for all materials, except Silux Plus. Significance A post-cure interval of 24 h resulted in enhanced mechanical and adhesive properties of flowable dental composites. In a minority of cases there was also a reduced incidence of marginal-gap formation. However the latter effect may be partly attributed to 24 h delayed polishing, even though such a delay is not usual clinical practice.</p

Marginal and flexural integrity of three classes of luting cement, with early finishing and water storage

Objectives. The aims of this investigation were to clarify the effects of finishing-time and 24 h water-storage on mechanical properties and marginal adaptation to dentin of seven modern luting cements, representing three chemical types. Methods. Bistite II, Chemiace II, Compolute, XenoCem, PermaCem, Fuji Cem and Fuji Plus were investigated with specimen sub-groups (N=10) for each property measured. The principal series of experiments was conducted in dentin cavities with interfacial polishing either immediately (3 min) after setting or after 24 h water-storage. After the finishing procedure, the maximum marginal gap width and the opposing width (if any) per cavity were measured microscopically, and summed. Then the overall sum of gap-widths (per group; N=10) was calculated. Marginal gaps were similarly measured in Teflon cavities, together with shear-bond-strengths to dentin and early flexural strengths, moduli and swelling data. Results. For specimen-sets polished immediately after setting, summed marginal gaps of 23–121 &#956;m were observed, for all luting cements except Compolute. A significantly different (p&#60;0.05) result of either no gap or 6–28 &#956;m summed gap-widths occurred in specimens polished after 24 h. For all materials, their shear-bond-strengths, flexural strength and moduli significantly increased after 24 h storage. Significance. The marginal behavior can be interpreted in terms of the contributions of bonding, shrinkage, swelling and compliance of components, along with compositional features of the cements. With these types of cement it is generally inadvisable to polish the interfacial luting surface immediately after cementing. The polishing procedures should be carried out not less than 24 h later. One resin-cement was able to withstand immediate finishing.</p

Root-surface gap-formation with RMGIC restorations minimized by reduced P/L ratio of the first increment and delayed polishing

Objectives This in vitro study evaluated the effect on interfacial gap-formation around resin-modified glass–ionomer (RMGIC) root surface restorations with (a) variations in powder/liquid ratio (P/L) of the first increment of an incremental procedure, compared with a bulk restoration technique, and (b) delayed versus immediate polishing, to permit maturation. Methods Cavity preparations were placed in premolar teeth on upper facial root surfaces. Two RMGICs were studied (Fuji II LC and Vitremer), with their associated conditioner or primer, applied with an incremental technique. The P/L ratio of the first increment was reduced to fractional (normalized) values between 0.2 and 1.0 of the manufacturers' recommended P/L, and the manufacturers' P/L was used for the second increment. Control groups were bulk filled. After polishing, either: (i) immediately after light-activation or (ii) after 24 h storage, the restored teeth were sectioned in a buccolingual direction through the center of the restoration and the presence or absence of marginal gaps was measured at ×1000 magnification at 14 points (each 0.5-mm apart) along the cavity restoration interface; (n=10; total points measured per group=140). Results For both RMGICs, significant differences (p Significance To minimize gap formation, more fluid mixes could be used especially with Fuji II LC to give improved adaptation to the dentin. Secondly, whenever possible, polishing should be delayed on the final increment to permit maturation and minimize mechanical disruption of both increments.</p

Longitudinal association among endothelial function, arterial stiffness and subclinical organ damage in hypertension

ObjectivesTo examine the longitudinal mutual association between endothelial dysfunction and arterial stiffness, and also to determine which of the two variables was more closely associated with the progression of subclinical organ damage.MethodsThe brachial-ankle pulse wave velocity (baPWV), carotid intima-media thickness (CIMT), estimated glomerular filtration rate, microalbuminuria and flow-mediated vasodilatation of the brachial artery (FMD) were measured three times at 1.5-year intervals in 674 Japanese patients receiving antihypertensive treatment.ResultsThe change of the baPWV during the study period was larger in the subjects with baseline FMD values in the lowest tertile as compared to those with baseline FMD values in the highest tertile. The change of the CIMT was smaller in the subjects with baseline baPWV values in the lowest tertile than in those with baseline baPWV values in the highest tertile. After the adjustment, the FMD value at the baseline was inversely associated with the baPWV at the end of the study period (beta = − 0.07, p = 0.01), although, the reverse association was not significant. The baPWV, but not the FMD value, at the baseline was associated with the CIMT (beta = 0.06, p = 0.04) measured at the end of the study period.ConclusionsIn hypertension, endothelial dysfunction was associated with the progression of arterial stiffness, although the reverse association was not confirmed. The increased arterial stiffness rather than endothelial dysfunction may be more closely associated with the progression of atherosclerotic vascular damage, and the endothelial dysfunction-arterial stiffness-atherosclerosis continuum may be important in hypertension

Real time assessment of surface interactions with a titanium passivation layer by surface plasmon resonance

Due to the high corrosion resistance and strength to density ratio titanium is widely used in industry, and also in a gamut of medical applications. Here we report for the first time on our development of a titanium passivation layer sensor that makes use of surface plasmon resonance (SPR). The deposited titanium metal layer on the sensor was passivated in air, similarly to titanium medical devices. Our "Ti-SPR sensor" enables analysis of biomolecule interactions with the passivated surface of titanium in real time. As a proof of concept, corrosion of a titanium passivation layer exposed to acid was monitored in real time. The Ti-SPR sensor can also accurately measure the time-dependence of protein adsorption onto the titanium passivation layer at sub-nanogram per square millimeter accuracy. Besides such SPR analyses, SPR imaging (SPRI) enables real time assessment of chemical surface processes that occur simultaneously at "multiple independent spots" on the Ti-SPR sensor, such as acid corrosion or adhesion of cells. Our Ti-SPR sensor will therefore be very useful to study titanium corrosion phenomena and biomolecular titanium-surface interactions with application in a broad range of industrial and biomedical fields

Longitudinal association among endothelial function, arterial stiffness and subclinical organ damage in hypertension

Objectives: To examine the longitudinal mutual association between endothelial dysfunction and arterial stiffness, and also to determine which of the two variables was more closely associated with the progression of subclinical organ damage. Methods: The brachial-ankle pulse wave velocity (baPWV), carotid intima-media thickness (CIMT), estimated glomerular filtration rate, microalbuminuria and flow-mediated vasodilatation of the brachial artery (FMD) were measured three times at 1.5-year intervals in 674 Japanese patients receiving antihypertensive treatment. Results: The change of the baPWV during the study period was larger in the subjects with baseline FMD values in the lowest tertile as compared to those with baseline FMD values in the highest tertile. The change of the CIMT was smaller in the subjects with baseline baPWV values in the lowest tertile than in those with baseline baPWV values in the highest tertile. After the adjustment, the FMD value at the baseline was inversely associated with the baPWV at the end of the study period (beta = − 0.07, p = 0.01), although, the reverse association was not significant. The baPWV, but not the FMD value, at the baseline was associated with the CIMT (beta = 0.06, p = 0.04) measured at the end of the study period. Conclusions: In hypertension, endothelial dysfunction was associated with the progression of arterial stiffness, although the reverse association was not confirmed. The increased arterial stiffness rather than endothelial dysfunction may be more closely associated with the progression of atherosclerotic vascular damage, and the endothelial dysfunction-arterial stiffness-atherosclerosis continuum may be important in hypertension

Reliability of measurement of endothelial function across multiple institutions and establishment of reference values in Japanese

Aims: For the standardization of flow-mediated vasodilatation (FMD) assessment as a clinical tool, validation of its reliability across multiple institutions and the establishment of normal/reference values based on reliable data from multiple institutions are needed. Methods and results: In Study 1, assessment of FMD (scan recording and analysis) using an ultrasonographic semi-automatic measuring system (sFMD) was conducted at 18 participating institutions (sFMD-INST) (n = 981). All of the brachial arterial scans were also analyzed at a core laboratory (sFMD-COLB). After 111 subjects with inadequate sFMD recordings were excluded (n = 880), the correlation between the sFMD-INST and sFMD-COLB improved from R = 0.725 to R = 0.838 (p < 0.001). In Study 2, based on good-quality sFMD data obtained from 6660 subjects without cardiovascular disease (CVD) and 729 subjects with CVD from 27 institutions, reference values of sFMD are proposed by the Framingham risk score (FRS)-based risk categories and according to gender and age. The receiver-operating characteristic curve analysis revealed a significant power of sFMD values in reference ranges to discriminate between subjects with and without CVD (e.g., area under curve = 0.64 in the FRS-low risk group). Conclusions: When the analysis was limited to cases with clear sFMD recordings, the reliability of the sFMD assessment (scan and its analysis) conducted in individual institutions appeared to be acceptable. Reference sFMD values (lower cuff occlusion) for the Japanese population are proposed based on reliable data derived from multiple institutions, and the reference values may identify patients without advanced vascular damage

Reduced reactive hyperemia of the brachial artery in diabetic patients assessed by repeated measurements : The FMD-J B study

Type 2 diabetes mellitus (T2DM) is a major cause of microvascular dysfunction. However, its effect on blood flow patterns during ischemic demand has not been adequately elucidated. In this study, we investigated the hypothesis that microvascular dysfunction in patients with T2DM manifests as brachial reactive hyperemia (BRH), defined as the ratio of peak blood flow velocities in a brachial artery before and after forearm cuff occlusion. The study enrolled 943 subjects (men, n = 152 [T2DM] and n = 371 [non-T2DM]; women, n = 107 [T2DM] and n = 313 [non-T2DM], respectively) with no history of cardiovascular disease. Semiautomatic measurements were obtained three times at 1.5-year intervals to confirm the reproducibility of factors involved in BRH for each sex. An age-adjusted mixed model demonstrated attenuated BRH in the presence of T2DM in both men (p = 0.022) and women (p = 0.031) throughout the study period. Post hoc analysis showed that the estimated BRH was significantly attenuated in patients with T2DM regardless of sex, except at baseline in women. In multivariate regression analysis, T2DM was a negative predictor of BRH at every measurement in men. For women, BRH was more strongly associated with alcohol consumption. Repeated measurements analysis revealed that T2DM was associated with attenuated postocclusion reactive hyperemia

Rationale and design of a multicenter randomized controlled study to evaluate the preventive effect of ipragliflozin on carotid atherosclerosis : the PROTECT study

Background: Type 2 diabetes mellitus is associated strongly with an increased risk of micro- and macro-vascular complications, leading to impaired quality of life and shortened life expectancy. In addition to appropriate glycemic control, multi-factorial intervention for a wide range of risk factors, such as hypertension and dyslipidemia, is crucial for management of diabetes. A recent cardiovascular outcome trial in diabetes patients with higher cardiovascular risk demonstrated that a SGLT2 inhibitor markedly reduced mortality, but not macro-vascular events. However, to date there is no clinical evidence regarding the therapeutic effects of SGLT2 inhibitors on arteriosclerosis. The ongoing PROTECT trial was designed to assess whether the SGLT2 inhibitors, ipragliflozin, prevented progression of carotid intima-media thickness in Japanese patients with type 2 diabetes mellitus. Methods: A total of 480 participants with type 2 diabetes mellitus with a HbA1c between 6 and 10 % despite receiving diet/exercise therapy and/or standard anti-diabetic agents for at least 3 months, will be randomized systematically (1:1) into either ipragliflozin or control (continuation of conventional therapy) groups. After randomization, ipragliflozin (50–100 mg once daily) will be added on to the background therapy in participants assigned to the ipragliflozin group. The primary endpoint of the study is the change in mean intima-media thickness of the common carotid artery from baseline to 24 months. Images of carotid intima-media thickness will be analyzed at a central core laboratory in a blinded manner. The key secondary endpoints include the change from baseline in other parameters of carotid intima-media thickness, various metabolic parameters, and renal function. Other cardiovascular functional tests are also planned for several sub-studies. Discussion: The PROTECT study is the first to assess the preventive effect of ipragliflozin on progression of carotid atherosclerosis using carotid intima-media thickness as a surrogate marker. The study has potential to clarify the protective effects of ipragliflozin on atherosclerosis